Equipment

Our microscopes

Commercial systems that we keep upgrading, and microscopes we design and build ourselves. Trained users book time in PPMS.

Abberior STED, INFINITY platform

Our Abberior STED microscope is built on the INFINITY platform around an Olympus IX83 microscope. It has four pulsed excitation lasers and a CW 405 nm laser, and two STED depletion lasers.

Detection uses avalanche photodiodes (APDs), with the MATRIX detector upgrade: a hexagonal arrangement of APDs that gives a higher signal-to-background ratio.

  • Techniques STED 3D, confocal, FLIM
  • Objectives 10×, 40×, 60×
  • Excitation CW 405 nm; pulsed 485, 518, 561, 640 nm
  • STED lasers 595 nm, 775 nm
  • Detectors Two-channel spectral detection unit (APDs); additional spectral unit with ultra-high-sensitivity FLIM-optimised APD; MATRIX detector upgrade on one APD channel
  • Scanning QUADScan beam scanner

Nikon N-STORM

The Nikon N-STORM system is based on a TIRF configuration with a four-colour laser bench. Focus stability comes from the Perfect Focus System, and the system is fully motorised.

Multicolour single-molecule localisation acquisitions use the high sensitivity of the EMCCD camera, and 3D localisation is obtained with a cylindrical lens.

  • Techniques STORM, dSTORM, PALM, SPT
  • Objectives 10×, 40×, 60×, 100×
  • Excitation 405, 488, 561, 647 nm
  • Camera EMCCD iXon 897

Leica TCS SP8 STED 3X FALCON

Based on the TCS SP8 confocal microscope. The STED 3X module gives 3D super-resolution in three optical bands thanks to its three depletion lasers. FALCON (FAst Lifetime CONtrast) is a fluorescence lifetime imaging platform fully integrated in the confocal, delivering video-rate FLIM with pixel-by-pixel quantification.

Single-molecule detectors (SMD HyD) give high detection efficiency, and resonant scanners reach video rate at 512 × 512 pixels. A white light laser and a 405 nm laser are included. Live imaging is possible with controlled environmental conditions.

  • Techniques STED 3D in 3 colours, confocal, FLIM, full hyperspectral (6D) laser scanning confocal
  • Objectives 10×, 63×, 100×
  • Excitation White light laser 470–670 nm (8 simultaneous lines); 405 nm
  • STED lasers 592 nm, 660 nm, 775 nm
  • Detectors 2 backward HyDs, 2 backward PMTs, 1 forward PMT
  • Scanning Galvanometric and resonant

Custom multiphoton microscope

A multimodal workstation built on a commercial Nikon inverted microscope, with an external scanning head where different femtosecond lasers are coupled.

This allows the simultaneous use of multiphoton techniques such as TPEF, SHG, polarisation-resolved SHG and THG for each excitation laser.

  • Techniques Widefield, confocal, hyperspectral confocal, TPEF, SHG, PSHG, THG, femtosecond nanosurgery
  • Objectives 2×, 10×, 20×, 40×, 60×, 100×; water immersion for multiphoton: Olympus 25× / 1.05 NA, Nikon 25× / 1.10 NA
  • Excitation Diode lasers 405, 561, 635 nm; Ti:sapphire 750–850 nm; femtosecond fibre lasers 1030 nm and 1550 nm
  • Detectors Forward multiphoton PMT, large-area IR photodiode, visible photodiode; 2 backward multiphoton PMTs
  • Scanning Galvanometric

Renishaw inVia confocal Raman

A confocal Raman microscope with two excitation lasers, fully automated: it switches excitation and adjusts laser power automatically, and calibrates and aligns itself for optimal acquisition.

It supports confocal Raman spectroscopy, surface-enhanced Raman spectroscopy (SERS) for higher sensitivity, and StreamLine and StreamHR configurations for faster Raman mapping. A motorised stage and widefield camera allow micrometric sample inspection.

The WiRE software includes cosmic ray removal, background subtraction, curve fitting, spectral unmixing, molecule identification and clustering, and lets you build your own spectral library.

  • Techniques Confocal Raman, SERS, StreamLine and StreamHR mapping
  • Objectives Air parfocal 5×, 20× long working distance, 20×, 50×, 100×; others on request (e.g. 60× water immersion)
  • Excitation 785 nm, 300 mW; 532 nm, 100 mW

Custom light-sheet microscopes

We design and build our own light-sheet microscopes. The multimodal SPIM/DSLM (mDSLM) is made to explore large 3D samples such as organoids and small embryos. Its modular design keeps a controlled physiological environment, so fast biological dynamics can be recorded in 3D.

We also run custom macroscopic, fluidic and iSPIM light-sheet systems. Contact us to discuss which one suits your sample.

  • Techniques (mDSLM) Linear and non-linear excitation; TPEF, multimodal digital scanned light-sheet, confocal line scan
  • Objectives (mDSLM) Excitation 10× / 0.3 NA and 10× / 0.45 NA; collection (water) 20× / 0.5 NA and 25× / 1.05 NA
  • Excitation (mDSLM) Diode 405, 488, 638 nm; DPSS 532, 651 nm; femtosecond 750–850, 1030, 1550 nm
  • Camera (mDSLM) Hamamatsu ORCA-Flash4.0